150W Durable Aluminum Load Resistor for LED, Power, Inverter
- Rated Power: 150W
- Resistance Value: 50Ω (customizable)
- Resistance Tolerance: ±1%, ±5%, ±10%
- Material: Aluminum housing + flame-retardant coating
- Operating Temperature: -55°C to +200°C
- Compliance: RoHS certified
Description
150W Durable Aluminum Load Resistor for LED, Power, Inverter
This 150W durable aluminum load resistor is designed to handle high power loads in LED lighting, power conversion, and inverter applications. With its aluminum housing and excellent heat dissipation design, it provides reliable performance under continuous or pulsed load. Ideal for engineers seeking current limiting, braking, or dummy load solutions in industrial and commercial systems.
Features
- Robust aluminum shell for enhanced heat dissipation and mechanical protection
- Suitable for LED dummy load, inverter braking, and power testing applications
- Stable resistance performance with low temperature drift
- High overload capacity and flame-retardant non-inductive design
- Complies with RoHS and supports customized resistance values
Dimension
| Type | Dimension(mm) | ||||||||
| L±1.0 | W±0.5 | H±0.5 | M±1.0 | K±1.0 | D±0.5 | T-max | C±0.5 | B±0.5 | |
| 5W | 15.5 | 16 | 8.5 | 11.4 | 12.5 | 2.0*2 | 1.5 | – | |
| 10W | 20 | 21 | 10 | 14 | 16 | 2.5*2 | – | 2 | – |
| 25W | 27 | 27 | 14 | 18.5 | 20 | 2.5*2 | 50 | 2 | – |
| 50W | 50 | 29 | 15.5 | 40 | 22 | 3.5*2 | 73 | 2 | – |
| 75W | 66 | 48 | 26 | 47 | 37 | 4.5*4 | 100 | 4.5 | M4 |
| 100W | 98 | 48 | 26 | 70 | 37 | 4.5*6 | 135 | 4.5 | M4 |
| 150W | 130 | 48 | 26 | 104 | 37 | 4.5*6 | 170 | 4.5 | M4 |
| 200W | 155 | 48 | 26 | 126 | 37 | 4.5*6 | 200 | 4.5 | M4 |
| 200WS | 92 | 73 | 45 | 70 | 58 | 5.5*6 | 150 | 5 | M6 |
| 250W | 112 | 73 | 45 | 90 | 58 | 5.5*6 | 170 | 5 | M6 |
| 300W | 130 | 73 | 45 | 102 | 58 | 5.5*6 | 185 | 5 | M6 |
| 500W | 204 | 73 | 45 | 174 | 58 | 5.5*6 | 260 | 5 | M6 |
Product performance
Power Rating: The RX24 gold aluminum housing resistor delivers its rated power when the environment is at 25°C and the working conditions include a matched heat sink. If you do not match the heat sink, you must reduce the resistor’s load power accordingly.
Power Derating Curve: Rated power represents the maximum continuous load power the resistor can handle when the ambient temperature stays below 70°C (the recommended operating range), while maintaining its mechanical and electrical performance. When the ambient temperature exceeds 70°C, apply the power derating curve shown in the figure below.
Product reliable performance
| Test Item | Test Method | Procedure | Requirements |
| Terminal robustness | IEC60115-14.16 | Pressurizing force:20N,10 seconds | No damage |
| Body robustness | IEC60115-14.15 | Central part pressurizing force:10N,10seconds | No damage |
| Vibration | IEC60115-14.22 | 10~55HZ/0.75mm/2H*3 | No damage |
| Soldering Heat | IEC60115-14.18 | 350±5℃,3S±0.5S | △R/R≤±0.5% |
| Solderability | IEC60115-14.17 | 245±5℃,5±0.5S | ≥95% |
| Temperature coefficient (TC.R.) |
IEC60115-14.8 | (PPM/℃)Resistance at room temperature(To);Resistance at T=To+100; | Refer to Ratings |
| Short Time Overload | IEC60115-14.13 | Min(√5×PxR UR) 5s | △R/R≤±2.0% |
| Voltage proof | IEC60115-14.7 | Un,60S,I≤2mA. | △R/R≤±1% |
| Insulation resistance | IEC60115-14.6 | DC500V,R>100MΩ | △R/R≤±0.5% |
| Endurance | IEC60115-14.25 | Min(Up,UR),1.5H-ON,0.5H-OFF,100OH | △R/R≤±5% |
| High Temp.Exposure | IEC60115-14.23 | 125℃,80%,500H | No damage |
| Temperature Cycle | IEC60115-14.19 | Cycle Below:
Cycle Time:1000Hrs. |
No damage △R/R≤±0.5% |
| Noninflammability | UL94-V0 | 16*Up,5min | No flame |
Standard voltage parameters
Applications
- LED lighting systems (dummy load resistor)
- Inverter startup protection
- Motor braking and energy dissipation
- Power supply units and converters
- Industrial automation and servo drive systems
- Elevators and heavy-duty electrical equipment
Looking for a higher power option? Check out our Aluminum Load Resistor for more demanding applications.
